Jagged cracks, loose tiles, cracked floorboards: all these floor problems can ruin your home’s appearance and lead to further damage. So what should you do if your floor needs help? After all, unless you’ve got a handyman services in Fountain Hills on hand, your options are limited. Here’s all you need to know to make your home look like a show home.
First things first – if it’s a tile floor, you’ll need to remove it. Luckily, tiles can be lifted with pry bars, which can also be used to move them and cut them into shape. For those with DIY skills, you might want to call in a professional remove list.
What to do with the tiles
Put them out of harm’s way – If you can’t move the tiles, you’ll need to cover them up with planks or boards. You can buy something cheap from a DIY store, or if you’re feeling fancy, hire a carpenter to do it for you.
If your floor is tiled or covered in hardwood, you’ll need to lay down planks to create a smooth surface.
Fix the cracks
Cracks can appear in various ways – if you’ve got a plank floor with old tiles, you’ll need to use cracks to draw your attention to the cracks in the floor. The best way to cover a crack is with plywood, though you can use cardboard, wood, or even wood veneer as long as it’s of high quality.
How to make a plank floor
The best and easiest way to make a plank floor is to use a flooring plank that has already been prepared. These can be found in DIY stores or online, but they are often in various states of repair.
The condition of the plank will determine the thickness of the plank you need to use. The thicker the plank, the thicker your floor will be. If you have a plank that’s already been cut to size, you should lay it across two nails to secure it in place.
Do the edges need to be sealed?
If you don’t want your plank floor to be as easy to see as possible, it’s time to seal your plank’s edges with joint compound.
You’ll need an amount of joint compound that is enough to fill the crack and cover up the edges.
If you have a curved or uneven crack, you’ll want to paint a line on the floor so you know where to apply the joint compound.